dmesg - 2012-03-28 20:03
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-20-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu3) ) #32-Ubuntu SMP Thu Mar 22 02:43:40 UTC 2012 (Ubuntu 3.2.0-20.32-generic-pae 3.2.12)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000025fe00000 (usable)
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/1800, BIOS F.12 10/26/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x25fe00 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 09D000000 mask FFF000000 uncachable
3 base 09E000000 mask FFE000000 uncachable
4 base 0FFC00000 mask FFFC00000 write-protect
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 240000000 mask FF0000000 write-back
8 base 250000000 mask FF0000000 write-back
9 base 25FE00000 mask FFFE00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00fe1b0] fe1b0
initial memory mapped : 0 - 02000000
Base memory trampoline at [c0099000] 99000 size 16384
init_memory_mapping: 0000000000000000-0000000037bfe000
0000000000 - 0000200000 page 4k
0000200000 - 0037a00000 page 2M
0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000
RAMDISK: 36500000 - 37278000
ACPI: RSDP 000fe020 00024 (v02 HPQOEM)
ACPI: XSDT 9cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 9cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 9cfeb000 0D408 (v01 HP INSYDE 00000000 MSFT 01000013)
ACPI: FACS 9cf6c000 00040
ACPI: ASF! 9cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
ACPI: HPET 9cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: APIC 9cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013)
ACPI: MCFG 9cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: SLIC 9cfea000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 9cfe9000 0051F (v01 HP INSYDE 00001000 MSFT 01000013)
ACPI: BOOT 9cfe7000 00028 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: ASPT 9cfe4000 00034 (v07 HP INSYDE 00000001 MSFT 01000013)
ACPI: SSDT 9cfe3000 0094E (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 9cfe2000 00996 (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 9cfe1000 002DA (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 9cfe0000 0035D (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 9cfda000 024A1 (v01 HP INSYDE 00001000 INTL 20100121)
ACPI: Local APIC address 0xfee00000
8834MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037bfe
HighMem 0x00037bfe -> 0x0025fe00
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0009ce3f
0: 0x0009cfff -> 0x0009d000
0: 0x00100000 -> 0x0025fe00
On node 0 totalpages: 2083789
free_area_init_node: node 0, pgdat c1869580, node_mem_map f1900200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 222502 pages, LIFO batch:31
HighMem zone: 17669 pages used for memmap
HighMem zone: 1837885 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7800000 s34240 r0 d23104 u262144
pcpu-alloc: s34240 r0 d23104 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064336
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
allocated 39837440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0025fe00)
Memory: 8192940k/9959424k available (5823k kernel code, 142216k reserved, 2844k data, 740k init, 7422216k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc1877000 - 0xc1930000 ( 740 kB)
.data : 0xc15afcbc - 0xc1876e00 (2844 kB)
.text : 0xc1000000 - 0xc15afcbc (5823 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f740a000 soft=f740c000
Extended CMOS year: 2000
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2195.189 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.37 BogoMIPS (lpj=8780756)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20110623
ftrace: allocating 26589 entries in 53 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f7558000 soft=f755a000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 99000
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
CPU 2 irqstacks, hard=f7566000 soft=f7568000
#2
smpboot cpu 2: start_ip = 99000
Initializing CPU#2
CPU2: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
CPU 3 irqstacks, hard=f759c000 soft=f759e000
#3
smpboot cpu 3: start_ip = 99000
Initializing CPU#3
CPU3: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
CPU 4 irqstacks, hard=f75b6000 soft=f75b8000
#4
smpboot cpu 4: start_ip = 99000
Initializing CPU#4
CPU4: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
CPU 5 irqstacks, hard=f75d4000 soft=f75d6000
#5
smpboot cpu 5: start_ip = 99000
Initializing CPU#5
CPU5: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
CPU 6 irqstacks, hard=f75e2000 soft=f75e4000
#6
smpboot cpu 6: start_ip = 99000
Initializing CPU#6
CPU6: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
CPU 7 irqstacks, hard=f7616000 soft=f7618000
#7 Ok.
smpboot cpu 7: start_ip = 99000
Initializing CPU#7
CPU7: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 8 CPUs
Total of 8 processors activated (35120.44 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes)
print_constraints: dummy:
RTC time: 12:32:39, date: 03/28/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 9ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 9ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 9ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 1 docks/bays found
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xc7504000-0xc750400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xc750a000-0xc750a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xc7500000-0xc7503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xc7509000-0xc75093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
pci 0000:00:1f.2: reg 10: [io 0x6088-0x608f]
pci 0000:00:1f.2: reg 14: [io 0x609c-0x609f]
pci 0000:00:1f.2: reg 18: [io 0x6080-0x6087]
pci 0000:00:1f.2: reg 1c: [io 0x6098-0x609b]
pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
pci 0000:00:1f.2: reg 24: [mem 0xc7508000-0xc75087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xc7506000-0xc75060ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f]
pci 0000:01:00.0: [1002:6760] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xc6500000-0xc651ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff]
pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff]
pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:0d:00.0: [8086:008b] type 0 class 0x000280
pci 0000:0d:00.0: reg 10: [mem 0xc4500000-0xc4501fff 64bit]
pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:13:00.0: [10ec:5209] type 0 class 0x00ff00
pci 0000:13:00.0: reg 10: [mem 0xc3501000-0xc3501fff]
pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:13:00.0: supports D1 D2
pci 0000:13:00.0: PME# supported from D1 D2 D3hot
pci 0000:13:00.0: PME# disabled
pci 0000:13:00.1: [10ec:5209] type 0 class 0x000805
pci 0000:13:00.1: reg 10: [mem 0xc3500000-0xc35000ff]
pci 0000:13:00.1: supports D1 D2
pci 0000:13:00.1: PME# supported from D1 D2 D3hot
pci 0000:13:00.1: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 13-18]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
pci 0000:19:00.0: [1033:0194] type 0 class 0x000c03
pci 0000:19:00.0: reg 10: [mem 0xc3400000-0xc3401fff 64bit]
pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
pci 0000:19:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 19-19]
pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
_OSC request data:1 1f 1f
pci0000:00: Requesting ACPI _OSC control (0x1d)
_OSC request data:1 0 1d
pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
i2c-core: driver [aat2870] using legacy suspend method
i2c-core: driver [aat2870] using legacy resume method
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 000000009ce3f000 - 000000009fffffff
reserve RAM buffer: 000000009d000000 - 000000009fffffff
reserve RAM buffer: 000000025fe00000 - 000000025fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-fe]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x0081-0x0091]
pnp 00:01: [io 0x0093-0x009f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [mem 0xff000000-0xffffffff]
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x00f0]
pnp 00:04: [irq 13]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x1000-0x100f]
pnp 00:05: [io 0x1010-0x1013]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x1000-0x100f] has been reserved
system 00:05: [io 0x1010-0x1013] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfed10000-0xfed17fff]
pnp 00:0a: [mem 0xfed18000-0xfed18fff]
pnp 00:0a: [mem 0xfed19000-0xfed19fff]
pnp 00:0a: [mem 0xe0000000-0xefffffff]
pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
pnp 00:0a: [mem 0xfed90000-0xfed93fff]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [irq 23]
pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp 00:0c: [mem 0x20000000-0x201fffff]
pnp 00:0c: [mem 0x40000000-0x401fffff]
system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
pci 0000:00:1c.2: PCI bridge to [bus 13-18]
pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 19-19]
pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff]
pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff]
pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
pci_bus 0000:13: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff]
pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Freeing initrd memory: 13792k freed
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:19:00.0: PCI INT A disabled
PCI: CLS 64 bytes, default 64
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1332937959.016:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.17)
msgmni has been set to 1532
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (34 C)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ERST: Table is not found!
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
brd: module loaded
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 41
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:19:00.0: setting latency timer to 64
xhci_hcd 0000:19:00.0: xHCI Host Controller
xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000
xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:19:00.0: xHCI Host Controller
xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpufreq-nforce2: No nForce2 chipset.
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Magic number: 4:834:532
bdi 1:10: hash matches
tty ttyS12: hash matches
rtc_cmos 00:06: setting system clock to 2012-03-28 12:32:40 UTC (1332937960)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: TOSHIBA MK7575GSX, GT001C, max UDMA/100
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK7575GS GT00 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata6.00: ATAPI: hp DVD A DS8A8SH, KH61, max UDMA/100
ata6.00: configured for UDMA/100
usb 1-1: new high-speed USB device number 2 using ehci_hcd
scsi 5:0:0:0: CD-ROM hp DVD A DS8A8SH KH61 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 740k freed
Write protecting the kernel text: 5824k
Write protecting the kernel read-only data: 2376k
NX-protecting the kernel data: 4416k
udevd[124]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:07:00.0: setting latency timer to 64
r8169 0000:07:00.0: irq 50 for MSI/MSI-X
r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xf844c000, 08:2e:5f:84:aa:f5, XID 0c900800 IRQ 50
r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:13:00.1: SDHCI controller found [10ec:5209] (rev 1)
sdhci-pci 0000:13:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: setting latency timer to 64
mmc0: no vmmc regulator found
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:13:00.1] using DMA
Refined TSC clocksource calibration: 2195.014 MHz.
Switching to clocksource tsc
usb 2-1: new high-speed USB device number 2 using ehci_hcd
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
usb 2-1.5: new full-speed USB device number 4 using ehci_hcd
udevd[415]: starting version 175
ADDRCONF(NETDEV_UP): eth0: link is not ready
Adding 8333308k swap on /dev/sda5. Priority:-1 extents:1 across:8333308k
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
mei: module is from the staging directory, the quality is unknown, you have been warned.
mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 51 for MSI/MSI-X
rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
Initializing Realtek PCIE storage driver...
rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Resource length: 0x1000
Original address: 0xc3501000, remapped address: 0xf843c000
pci->irq = 18
rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
rts_pstor 0000:13:00.0: setting latency timer to 64
input: HP WMI hotkeys as /devices/virtual/input/input4
type=1400 audit(1332937979.378:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=686 comm="apparmor_parser"
type=1400 audit(1332937979.378:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=681 comm="apparmor_parser"
type=1400 audit(1332937979.378:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=686 comm="apparmor_parser"
type=1400 audit(1332937979.378:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser"
type=1400 audit(1332937979.378:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=686 comm="apparmor_parser"
type=1400 audit(1332937979.378:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser"
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
scsi6 : SCSI emulation for PCI-Express Mass Storage devices
rts_pstor: waiting for device to settle before scanning
hp_accel: hardware type DV7 found
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: no more MTRRs available
[drm] MTRR allocation failed. Graphics performance may suffer.
i915 0000:00:02.0: irq 52 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
init: flush-early-job-log main process (785) terminated with status 1
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 7782 MBytes.
[fglrx] vendor: 1002 device: 6760 count: 1
[fglrx] ioport: bar 4, base 0x5000, size: 0x100
pci 0000:01:00.0: enabling device (0000 -> 0003)
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
lis3lv02d: 8 bits 3DC sensor found
init: failsafe main process (782) killed by TERM signal
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2011 Intel Corporation
iwlwifi 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlwifi 0000:0d:00.0: setting latency timer to 64
iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:0d:00.0: pci_resource_base = f8abc000
iwlwifi 0000:0d:00.0: HW Revision ID = 0x34
iwlwifi 0000:0d:00.0: irq 53 for MSI/MSI-X
iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:0d:00.0: device EEPROM VER=0x716, CALIB=0x6
iwlwifi 0000:0d:00.0: Device SKU: 0X150
iwlwifi 0000:0d:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
iwlwifi 0000:0d:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input6
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
rts_pstor: device scan complete
scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
Bad LUN (0:1)
Bad target number (1:0)
Bad target number (2:0)
Bad target number (3:0)
Bad target number (4:0)
Bad target number (5:0)
Bad target number (6:0)
Bad target number (7:0)
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
iwlwifi 0000:0d:00.0: loaded firmware version 18.168.6.1
Registered led device: phy0-led
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
Registered led device: hp::hddprotect
hp_accel: driver loaded
Bluetooth: Generic Bluetooth USB driver ver 0.6
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:d281)
input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: ELECOM ELECOM micro Grast mouse( Bit ) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input10
generic-usb 0003:056E:0056.0001: input,hidraw0: USB HID v1.00 Mouse [ELECOM ELECOM micro Grast mouse( Bit )] on usb-0000:00:1d.0-1.1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
ppdev: user-space parallel port driver
type=1400 audit(1332937981.594:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=971 comm="apparmor_parser"
type=1400 audit(1332937981.594:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=971 comm="apparmor_parser"
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1332937982.230:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1104 comm="apparmor_parser"
type=1400 audit(1332937982.230:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1109 comm="apparmor_parser"
r8169 0000:07:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
wlan0: authenticate with 00:1f:f3:c4:ba:f3 (try 1)
wlan0: authenticated
wlan0: waiting for beacon from 00:1f:f3:c4:ba:f3
wlan0: beacon received
wlan0: associate with 00:1f:f3:c4:ba:f3 (try 1)
wlan0: RX AssocResp from 00:1f:f3:c4:ba:f3 (capab=0x431 status=0 aid=4)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: BE
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: BE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
postgres (1392): /proc/1392/oom_adj is deprecated, please use /proc/1392/oom_score_adj instead.
Non-volatile memory driver v1.3
fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1716
[fglrx] Firegl kernel thread PID: 1717
[fglrx] Firegl kernel thread PID: 1718
[fglrx] IRQ 55 Enabled
[fglrx] Gart USWC size:1280 M.
[fglrx] Gart cacheable size:508 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
wlan0: no IPv6 routers present
cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
iwlwifi 0000:0d:00.0: Tx aggregation enabled on ra = 00:1f:f3:c4:ba:f3 tid = 0
show_signal_msg: 57 callbacks suppressed
zeitgeist-datah[2434]: segfault at 0 ip b752eeda sp bfcefa08 error 4 in libglib-2.0.so.0.3122.0[b74f8000+f7000]
hp_wmi: Unknown event_id - 10 - 0x0
hp_wmi: Unknown event_id - 10 - 0x1
hp_wmi: Unknown event_id - 10 - 0x0
hp_wmi: Unknown event_id - 10 - 0x1
hp_wmi: Unknown event_id - 0 - 0x0
hp_wmi: Unknown event_id - 10 - 0x1
init: anacron main process (1203) killed by TERM signal
hp_wmi: Unknown event_id - 0 - 0x0
hp_wmi: Unknown event_id - 10 - 0x1
NMI watchdog enabled, takes one hw-pmu counter.
NMI watchdog enabled, takes one hw-pmu counter.
NMI watchdog enabled, takes one hw-pmu counter.
NMI watchdog enabled, takes one hw-pmu counter.
NMI watchdog enabled, takes one hw-pmu counter.
NMI watchdog enabled, takes one hw-pmu counter.
NMI watchdog enabled, takes one hw-pmu counter.
NMI watchdog enabled, takes one hw-pmu counter.
hp_wmi: Unknown event_id - 10 - 0x0
iwlwifi 0000:0d:00.0: Tx aggregation enabled on ra = 00:1f:f3:c4:ba:f3 tid = 6
hp_wmi: Unknown event_id - 0 - 0x0
hp_wmi: Unknown event_id - 10 - 0x0
hp_wmi: Unknown event_id - 10 - 0x1
r8169 0000:07:00.0: PME# enabled
wlan0: deauthenticating from 00:1f:f3:c4:ba:f3 by local choice (reason=3)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
r8169 0000:07:00.0: PME# disabled
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
Ready to suspend
[fglrx] IRQ 55 Disabled
[fglrx] Preparing suspend fglrx in kernel.
snd_hda_intel 0000:00:1b.0: PCI INT A disabled
sdhci-pci 0000:13:00.1: PCI INT B disabled
ehci_hcd 0000:00:1d.0: PCI INT A disabled
ehci_hcd 0000:00:1a.0: PCI INT A disabled
PM: suspend of drv:hp_accel dev:HPQ0004:00 complete after 303.267 msecs
PM: suspend of drv:sd dev:0:0:0:0 complete after 618.991 msecs
PM: suspend of drv:scsi dev:target0:0:0 complete after 618.956 msecs
PM: suspend of drv:scsi dev:host0 complete after 568.044 msecs
PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 579.965 msecs
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 873.814 msecs
PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 873.517 msecs
rts_pstor 0000:13:00.0: PCI INT A disabled
PM: suspend of drv:rts_pstor dev:0000:13:00.0 complete after 1016.223 msecs
PM: suspend of drv:pcieport dev:0000:00:1c.2 complete after 1015.959 msecs
PM: suspend of drv: dev:pci0000:00 complete after 1015.861 msecs
PM: suspend of devices complete after 1068.043 msecs
PM: suspend devices took 1.068 seconds
xhci_hcd 0000:19:00.0: PME# enabled
xhci_hcd 0000:19:00.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: PME# enabled
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: PME# enabled
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 95.841 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
CPU 4 is now offline
Broke affinity for irq 1
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 99000
Initializing CPU#1
Calibrating delay loop (skipped) already calibrated this CPU
CPU1: Thermal monitoring handled by SMI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 99000
Initializing CPU#2
Calibrating delay loop (skipped) already calibrated this CPU
CPU2: Thermal monitoring handled by SMI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 99000
Initializing CPU#3
Calibrating delay loop (skipped) already calibrated this CPU
CPU3: Thermal monitoring handled by SMI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 99000
Initializing CPU#4
Calibrating delay loop (skipped) already calibrated this CPU
CPU4: Thermal monitoring handled by SMI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 99000
Initializing CPU#5
Calibrating delay loop (skipped) already calibrated this CPU
CPU5: Thermal monitoring handled by SMI
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 99000
Initializing CPU#6
Calibrating delay loop (skipped) already calibrated this CPU
CPU6: Thermal monitoring handled by SMI
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 99000
Initializing CPU#7
Calibrating delay loop (skipped) already calibrated this CPU
CPU7: Thermal monitoring handled by SMI
CPU7 is up
ACPI: Waking up from system sleep state S3
pcieport 0000:00:01.0: restoring config space at offset 0x7 (was 0x20005050, writing 0x5050)
pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: PME# disabled
snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20004040, writing 0x4040)
pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20003030, writing 0x3030)
pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20002020, writing 0x2020)
pcieport 0000:00:1c.3: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: PME# disabled
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100403)
r8169 0000:07:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
iwlwifi 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
rts_pstor 0000:13:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
rts_pstor 0000:13:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
sdhci-pci 0000:13:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
xhci_hcd 0000:19:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
xhci_hcd 0000:19:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100402)
xhci_hcd 0000:19:00.0: wake-up capability disabled by ACPI
xhci_hcd 0000:19:00.0: PME# disabled
PM: early resume of devices complete after 1.461 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
mei 0000:00:16.0: irq 51 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
Ready to resume
rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sdhci-pci 0000:13:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
rts_pstor 0000:13:00.0: setting latency timer to 64
rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
sdhci-pci 0000:13:00.1: setting latency timer to 64
xhci_hcd 0000:19:00.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
fglrx_pci 0000:01:00.0: setting latency timer to 64
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 55 Enabled
PM: resume of drv:hub dev:4-0:1.0 complete after 125.960 msecs
PM: resume of drv: dev:ep_00 complete after 125.977 msecs
PM: resume of drv: dev:ep_81 complete after 125.973 msecs
PM: resume of drv: dev:ep_00 complete after 125.982 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 126.017 msecs
PM: resume of drv: dev:ep_81 complete after 126.076 msecs
PM: resume of drv:hub dev:2-1:1.0 complete after 177.421 msecs
PM: resume of drv: dev:ep_00 complete after 177.388 msecs
PM: resume of drv: dev:ep_81 complete after 177.451 msecs
PM: resume of drv:hub dev:1-1:1.0 complete after 177.842 msecs
PM: resume of drv: dev:ep_81 complete after 177.745 msecs
PM: resume of drv: dev:ep_00 complete after 177.729 msecs
PM: resume of drv:rts_pstor dev:0000:13:00.0 complete after 202.383 msecs
PM: resume of drv:scsi dev:host6 complete after 198.455 msecs
PM: resume of drv:scsi dev:target6:0:0 complete after 198.445 msecs
PM: resume of drv:scsi_host dev:host6 complete after 198.473 msecs
PM: resume of drv:sd dev:6:0:0:0 complete after 198.448 msecs
PM: resume of drv:scsi_device dev:6:0:0:0 complete after 198.470 msecs
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
PM: resume of drv:i915 dev:0000:00:02.0 complete after 349.217 msecs
PM: resume of drv:hp_accel dev:HPQ0004:00 complete after 337.588 msecs
usb 2-1.1: reset low-speed USB device number 3 using ehci_hcd
PM: resume of drv:usbhid dev:2-1.1:1.0 complete after 719.046 msecs
PM: resume of drv: dev:ep_00 complete after 719.005 msecs
PM: resume of drv: dev:ep_81 complete after 719.060 msecs
usb 2-1.5: reset full-speed USB device number 4 using ehci_hcd
btusb 2-1.5:1.0: no reset_resume for driver btusb?
btusb 2-1.5:1.1: no reset_resume for driver btusb?
usb 1-1.1: reset full-speed USB device number 3 using ehci_hcd
PM: resume of drv:usb dev:1-1.1:1.0 complete after 1059.043 msecs
PM: resume of drv: dev:ep_00 complete after 1058.899 msecs
PM: resume of drv: dev:ep_01 complete after 1059.009 msecs
PM: resume of drv: dev:ep_83 complete after 1058.948 msecs
PM: resume of drv: dev:ep_82 complete after 1058.973 msecs
PM: resume of drv: dev:ep_81 complete after 1059.067 msecs
usb 1-1.2: reset high-speed USB device number 4 using ehci_hcd
PM: resume of drv:usb dev:2-1.5:1.1 complete after 1139.321 msecs
PM: resume of drv:usb dev:2-1.5:1.0 complete after 1139.405 msecs
PM: resume of drv: dev:ep_00 complete after 1139.290 msecs
PM: resume of drv: dev:ep_03 complete after 1139.329 msecs
PM: resume of drv: dev:ep_81 complete after 1139.401 msecs
PM: resume of drv: dev:ep_82 complete after 1139.372 msecs
PM: resume of drv: dev:ep_02 complete after 1139.392 msecs
PM: resume of drv: dev:ep_83 complete after 1139.332 msecs
PM: resume of drv:uvcvideo dev:1-1.2:1.1 complete after 1252.677 msecs
PM: resume of drv:uvcvideo dev:1-1.2:1.0 complete after 1252.712 msecs
PM: resume of drv: dev:ep_00 complete after 1252.657 msecs
PM: resume of drv: dev:ep_81 complete after 1252.747 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/100
PM: resume of drv:sd dev:0:0:0:0 complete after 1979.121 msecs
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1979.158 msecs
PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1605.043 msecs
PM: resume of devices complete after 1991.333 msecs
PM: resume devices took 1.992 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
hp_wmi: Unknown event_id - 10 - 0x0
r8169 0000:07:00.0: PME# enabled
r8169 0000:07:00.0: PME# disabled
r8169 0000:07:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
wlan0: authenticate with 00:1f:f3:c4:ba:f3 (try 1)
wlan0: authenticated
wlan0: waiting for beacon from 00:1f:f3:c4:ba:f3
wlan0: beacon received
wlan0: associate with 00:1f:f3:c4:ba:f3 (try 1)
wlan0: RX AssocResp from 00:1f:f3:c4:ba:f3 (capab=0x431 status=0 aid=4)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: BE
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: BE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
iwlwifi 0000:0d:00.0: Tx aggregation enabled on ra = 00:1f:f3:c4:ba:f3 tid = 0
wlan0: no IPv6 routers present
cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
iwlwifi 0000:0d:00.0: Tx aggregation enabled on ra = 00:1f:f3:c4:ba:f3 tid = 6
ata6: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
ata6: irq_stat 0x00000040, connection status changed
ata6: SError: { CommWake DevExch }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
hp_wmi: Unknown event_id - 10 - 0x1
hp_wmi: Unknown event_id - 10 - 0x0
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 - driver resynced.
ata6: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
ata6: irq_stat 0x00000040, connection status changed
ata6: SError: { CommWake DevExch }
ata6: hard resetting link
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
ata6: EH complete
r8169 0000:07:00.0: PME# enabled
wlan0: deauthenticating from 00:1f:f3:c4:ba:f3 by local choice (reason=3)
cfg80211: All devices are disconnected, going to restore regulatory settings
cfg80211: Restoring regulatory settings
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
r8169 0000:07:00.0: PME# disabled
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.01 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
Ready to suspend
[fglrx] IRQ 55 Disabled
snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[fglrx] Preparing suspend fglrx in kernel.
sdhci-pci 0000:13:00.1: PCI INT B disabled
ehci_hcd 0000:00:1d.0: PCI INT A disabled
ehci_hcd 0000:00:1a.0: PCI INT A disabled
PM: suspend of drv:hp_accel dev:HPQ0004:00 complete after 414.176 msecs
PM: suspend of drv:sd dev:0:0:0:0 complete after 623.951 msecs
PM: suspend of drv:scsi dev:target0:0:0 complete after 623.792 msecs
PM: suspend of drv:scsi dev:host0 complete after 572.032 msecs
PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 586.928 msecs
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of drv:fglrx_pci dev:0000:01:00.0 complete after 871.005 msecs
PM: suspend of drv:pcieport dev:0000:00:01.0 complete after 870.789 msecs
rts_pstor 0000:13:00.0: PCI INT A disabled
PM: suspend of drv:rts_pstor dev:0000:13:00.0 complete after 1015.136 msecs
PM: suspend of drv:pcieport dev:0000:00:1c.2 complete after 1015.037 msecs
PM: suspend of drv: dev:pci0000:00 complete after 1014.817 msecs
PM: suspend of devices complete after 1067.990 msecs
PM: suspend devices took 1.068 seconds
xhci_hcd 0000:19:00.0: PME# enabled
xhci_hcd 0000:19:00.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1d.0: PME# enabled
ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
ehci_hcd 0000:00:1a.0: PME# enabled
ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
PM: late suspend of devices complete after 95.891 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
CPU 1 is now offline
CPU 2 is now offline
CPU 3 is now offline
CPU 4 is now offline
CPU 5 is now offline
CPU 6 is now offline
CPU 7 is now offline
Extended CMOS year: 2000
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
CPU0: Thermal monitoring handled by SMI
Extended CMOS year: 2000
Enabling non-boot CPUs ...
Booting Node 0 Processor 1 APIC 0x1
smpboot cpu 1: start_ip = 99000
Initializing CPU#1
Calibrating delay loop (skipped) already calibrated this CPU
CPU1: Thermal monitoring handled by SMI
CPU1 is up
Booting Node 0 Processor 2 APIC 0x2
smpboot cpu 2: start_ip = 99000
Initializing CPU#2
Calibrating delay loop (skipped) already calibrated this CPU
CPU2: Thermal monitoring handled by SMI
CPU2 is up
Booting Node 0 Processor 3 APIC 0x3
smpboot cpu 3: start_ip = 99000
Initializing CPU#3
Calibrating delay loop (skipped) already calibrated this CPU
CPU3: Thermal monitoring handled by SMI
CPU3 is up
Booting Node 0 Processor 4 APIC 0x4
smpboot cpu 4: start_ip = 99000
Initializing CPU#4
Calibrating delay loop (skipped) already calibrated this CPU
CPU4: Thermal monitoring handled by SMI
CPU4 is up
Booting Node 0 Processor 5 APIC 0x5
smpboot cpu 5: start_ip = 99000
Initializing CPU#5
Calibrating delay loop (skipped) already calibrated this CPU
CPU5: Thermal monitoring handled by SMI
CPU5 is up
Booting Node 0 Processor 6 APIC 0x6
smpboot cpu 6: start_ip = 99000
Initializing CPU#6
Calibrating delay loop (skipped) already calibrated this CPU
CPU6: Thermal monitoring handled by SMI
CPU6 is up
Booting Node 0 Processor 7 APIC 0x7
smpboot cpu 7: start_ip = 99000
Initializing CPU#7
Calibrating delay loop (skipped) already calibrated this CPU
CPU7: Thermal monitoring handled by SMI
CPU7 is up
ACPI: Waking up from system sleep state S3
pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1a.0: PME# disabled
snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
pcieport 0000:00:1c.3: restoring config space at offset 0xa (was 0xffffffff, writing 0x0)
ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
ehci_hcd 0000:00:1d.0: PME# disabled
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100403)
r8169 0000:07:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
iwlwifi 0000:0d:00.0: restoring config space at offset 0xf (was 0x100, writing 0x103)
iwlwifi 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100406)
rts_pstor 0000:13:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
rts_pstor 0000:13:00.0: restoring config space at offset 0xc (was 0x0, writing 0xffff0000)
sdhci-pci 0000:13:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
xhci_hcd 0000:19:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
xhci_hcd 0000:19:00.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100402)
xhci_hcd 0000:19:00.0: wake-up capability disabled by ACPI
xhci_hcd 0000:19:00.0: PME# disabled
PM: early resume of devices complete after 1.395 msecs
i915 0000:00:02.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
mei 0000:00:16.0: irq 51 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ahci 0000:00:1f.2: setting latency timer to 64
ehci_hcd 0000:00:1d.0: setting latency timer to 64
Ready to resume
rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
rts_pstor 0000:13:00.0: setting latency timer to 64
rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
sdhci-pci 0000:13:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
sdhci-pci 0000:13:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:13:00.1: setting latency timer to 64
fglrx_pci 0000:01:00.0: setting latency timer to 64
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
xhci_hcd 0000:19:00.0: setting latency timer to 64
usb usb3: root hub lost power or was reset
usb usb4: root hub lost power or was reset
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 55 Enabled
PM: resume of drv: dev:ep_00 complete after 122.077 msecs
PM: resume of drv: dev:ep_00 complete after 122.021 msecs
PM: resume of drv:hub dev:4-0:1.0 complete after 122.098 msecs
PM: resume of drv:hub dev:3-0:1.0 complete after 122.116 msecs
PM: resume of drv: dev:ep_81 complete after 122.054 msecs
PM: resume of drv: dev:ep_81 complete after 122.133 msecs
hp_wmi: Unknown event_id - 10 - 0x1
PM: resume of drv:hub dev:2-1:1.0 complete after 177.800 msecs
PM: resume of drv: dev:ep_00 complete after 177.762 msecs
PM: resume of drv: dev:ep_81 complete after 177.824 msecs
PM: resume of drv: dev:ep_00 complete after 181.887 msecs
PM: resume of drv:hub dev:1-1:1.0 complete after 181.939 msecs
PM: resume of drv: dev:ep_81 complete after 181.961 msecs
PM: resume of drv:rts_pstor dev:0000:13:00.0 complete after 202.425 msecs
PM: resume of drv:scsi dev:host6 complete after 201.445 msecs
PM: resume of drv:scsi dev:target6:0:0 complete after 201.422 msecs
PM: resume of drv:scsi_host dev:host6 complete after 201.459 msecs
PM: resume of drv:sd dev:6:0:0:0 complete after 201.456 msecs
PM: resume of drv:scsi_device dev:6:0:0:0 complete after 201.479 msecs
usb 2-1.5: reset full-speed USB device number 4 using ehci_hcd
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: configured for UDMA/100
btusb 2-1.5:1.0: no reset_resume for driver btusb?
btusb 2-1.5:1.1: no reset_resume for driver btusb?
PM: resume of drv:hp_accel dev:HPQ0004:00 complete after 407.728 msecs
PM: resume of drv:i915 dev:0000:00:02.0 complete after 449.257 msecs
PM: resume of drv: dev:ep_00 complete after 593.481 msecs
PM: resume of drv:usb dev:2-1.5:1.0 complete after 593.600 msecs
PM: resume of drv:usb dev:2-1.5:1.1 complete after 593.547 msecs
PM: resume of drv: dev:ep_02 complete after 593.614 msecs
PM: resume of drv: dev:ep_83 complete after 593.561 msecs
PM: resume of drv: dev:ep_03 complete after 593.587 msecs
PM: resume of drv: dev:ep_81 complete after 593.656 msecs
PM: resume of drv: dev:ep_82 complete after 593.639 msecs
usb 2-1.1: reset low-speed USB device number 3 using ehci_hcd
PM: resume of drv:usbhid dev:2-1.1:1.0 complete after 885.952 msecs
PM: resume of drv: dev:ep_00 complete after 885.926 msecs
PM: resume of drv: dev:ep_81 complete after 885.979 msecs
usb 1-1.1: reset full-speed USB device number 3 using ehci_hcd
PM: resume of drv:usb dev:1-1.1:1.0 complete after 1047.785 msecs
PM: resume of drv: dev:ep_00 complete after 1047.706 msecs
PM: resume of drv: dev:ep_83 complete after 1047.767 msecs
PM: resume of drv: dev:ep_82 complete after 1047.783 msecs
PM: resume of drv: dev:ep_81 complete after 1047.806 msecs
PM: resume of drv: dev:ep_01 complete after 1047.829 msecs
usb 1-1.2: reset high-speed USB device number 4 using ehci_hcd
PM: resume of drv:uvcvideo dev:1-1.2:1.0 complete after 1240.775 msecs
PM: resume of drv:uvcvideo dev:1-1.2:1.1 complete after 1240.727 msecs
PM: resume of drv: dev:ep_00 complete after 1240.714 msecs
PM: resume of drv: dev:ep_81 complete after 1240.792 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/100
PM: resume of drv:sd dev:0:0:0:0 complete after 2043.448 msecs
PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2043.513 msecs
PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1593.181 msecs
PM: resume of devices complete after 2055.788 msecs
PM: resume devices took 2.056 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
hp_wmi: Unknown event_id - 10 - 0x1
r8169 0000:07:00.0: PME# enabled
r8169 0000:07:00.0: PME# disabled
r8169 0000:07:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
iwlwifi 0000:0d:00.0: Error sending REPLY_TX_LINK_QUALITY_CMD: time out after 2000ms.
iwlwifi 0000:0d:00.0: Current CMD queue read_ptr 20 write_ptr 21
iwlwifi 0000:0d:00.0: HCMD_ACTIVE already clear for command REPLY_ADD_STA
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with 00:1f:f3:c4:ba:f3 (try 1)
wlan0: authenticated
wlan0: waiting for beacon from 00:1f:f3:c4:ba:f3
wlan0: beacon received
wlan0: associate with 00:1f:f3:c4:ba:f3 (try 1)
wlan0: RX AssocResp from 00:1f:f3:c4:ba:f3 (capab=0x431 status=0 aid=3)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: BE
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Regulatory domain changed to country: BE
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
iwlwifi 0000:0d:00.0: Tx aggregation enabled on ra = 00:1f:f3:c4:ba:f3 tid = 0
wlan0: no IPv6 routers present
cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0